New York State Certificate of Competency (CoC) Class B Pyrotechnician License Practice Exam

These questions are part of the practice quiz. Start practicing

• In the case of an Unusual Incident, what must the holder of a Certificate of Competency do?
• Buried mortars should be buried to what depth relative to their length?
• Which types of devices typically require higher security and oversight due to hazard?
• When aerial shells larger than 6 inches are fired remotely, where should the shooter be?
• Which of the following sets lists items typically restricted to on-site handling?
• What type of ongoing training is typically required for Class B pyrotechnicians?
• How should defective devices be handled?
• What is the minimum distance fireworks preparation areas must be from public access?
• To legally act as a Certified Pyrotechnician, what must you possess?
• How many ready box tenders is appropriate?
• Which statement best describes whether chain fused aerial shells may be reloaded?
• What additional support can be placed under a buried mortar?
• Which statement correctly identifies the Commissioner in this context?
• Which item is a long tube containing slow burning pyrotechnic composition used to ignite fireworks?
• What is the maximum powder quantity allowed in a Ground Salute?
• Cone Fountain is packaged in what form?
• Aerial Shell is defined as which of the following?
• Which term describes debris expelled by a pyrotechnic device capable of causing injury?
• Which option is acceptable as underlayment support under a buried mortar?
• What documentation should be completed after a safety incident involving pyrotechnic devices?
• How are remote weather phenomena monitored during a display?
• When loading a shell into a recently fired mortar, the loader should?
• Which distance is the minimum separation between buried mortars and the wall of troughs or drums?
• Who is typically responsible for overall safety and regulatory compliance at a pyrotechnic display site?
• How can you verify that a device is properly labeled and stored?
• Which NFPA standards are referenced for fireworks definitions?
• Angled mortars can be placed how much closer to the viewing area?
• During a serious electro-static discharge hazard, which action is required?
• In securing buried mortars, the separation from the wall of troughs or drums should be at least?
• The required minimum distance from spectators to fireworks is best described as:
• Which term refers to a fuse made from string impregnated with black powder?
• What is the minimum distance fireworks preparation areas must be from public access?
• What is the minimum experience required to apply for a Certificate of Competency?
• Direct Supervision is defined as what?
• Chain fused aerial shells shall not be reloaded.
• Which device described as a fountain may produce a shower of colored sparks and possibly a whistling effect or smoke and has a maximum of 75 g in a cylindrical tube?
• Which description correctly identifies items typically restricted to on-site handling?
• Smoking materials, matches or lighters are not permitted within how many feet of fireworks or pyrotechnic devices?
• What is the Operator's responsibility?
• How does NYS licensing interact with local fire department permits?
• Minimum distance for assembly or repair from bulk fireworks storage?
• What is the minimum distance fireworks preparation areas must be from public access?
• Which elements are typically included in a pre-show safety briefing?
• Which of the following is a Certified Occupation?
• During a performance, where should a Ready Box be located?
• No employer, contractor, or agent, including a sponsor or supplier, shall knowingly permit an individual to act as Certified Pyrotechnician unless?
• Which weather scenario is commonly cited as a reason to postpone or cancel a pyrotechnic display?
• What is defined as a portable, weather-resistant container that protects contents from burning debris and has a self-closing cover?
• Which tasks are typical maintenance activities for firing equipment between uses?
• Which of the following best describes the set of elements that should appear on a device label for inventory control?
• Buried mortars must be separated from the wall of troughs or drums by at least how many inches?
• Which fuse is made from a fuse of string impregnated with black powder?
• Mortars of any type 6 inches in diameter or less may be reloaded up to how many times?
• Which class is defined as Very Insensitive Explosive?
• Single break Aerial Salute shells over 3 inches in diameter shall be separated from other mortars by what distance?
• What is the minimum display radius for ground displays?
• An Unusual Incident Report should include which information?
• From a regulatory perspective, how do consumer fireworks differ from display fireworks?
• Minimum distance fireworks preparation areas must maintain from public access is
• Discharge Site is defined as:
• The term 'Commissioner' refers to which office in this licensing context?
• How should pyrotechnic devices be stored on site prior to use?
• Which factors commonly lead to postponement or cancellation of a display?
• In disposing of pyrotechnic waste, which practices are recommended?
• What does the term Proximate Audience mean in pyrotechnic safety?
• If a ground salute uses a 3 x 3 inch case, what is the maximum powder charge allowed?
• How should transportation of pyrotechnic devices be handled?
• Which element is typically included in a fire-safety plan for a pyrotechnics display?
• The mandated clearance between buried mortars and the wall of troughs or drums is
• Class 1.2G devices are defined as which of the following?
• What is the minimum age to apply for a Certificate of Competency?
• Class 1.5G devices are defined as which of the following?
• How many loaders per shooter?
• Which elements are included in the Display Site?
• Which of the following best describes the required separation between buried mortars and the wall of troughs or drums?
• Buried mortars shall be separated by which distance?
• Which statement best defines a Ready Box?
• Barrage refers to which of the following?
• Class 1.3G devices are defined as which of the following?
• Who is typically responsible for reporting incidents and returning devices to storage per policy?
• Why is inventory control critical for pyrotechnic devices?
• How should firing troughs be oriented relative to the audience?
• Which of the following best describes an unusual incident requiring reporting?
• What are the general requirements for remote firing systems?
• A chain fused mortar rack may hold up to how many 3 inch shells?
• What is the primary goal of a firing plan?
• How long is a NYS Certificate of Competency valid for?
• What is the maximum shell diameter for manual firing on a floating vessel?
• Why is wind direction and speed critical to display planning?
• What is the staffing ratio for ready box tenders per box?
• Minimum display site for an electrically fired show is calculated using which formula?
• What is NFPA 1123 primarily concerned with?
• Which actions comprise post-event documentation responsibilities?
• If a PIC observes a suspected safety violation on site, what is the correct sequence of actions?
• Which option correctly states the required separation for buried mortars relative to the wall of troughs or drums?
• Identify the minimum separation required between buried mortars and the wall of troughs or drums.
• Why is segregating pyrotechnic waste streams important?
• To work as an Authorized Assistant, which condition must be satisfied?
• In a post-show debrief, what should be documented regarding misfires?
• Unauthorized marine craft shall be separated from vessel or platform by a minimum of how many feet during loading of fireworks?
• Which weather factor is explicitly listed as influencing safety decisions?
• How do insurance and event host requirements influence CoC compliance?
• Aerial shells, Mines and Comets shall be classified and defined by?
• What actions should be taken if a device misfires or fails to ignite?
• Which elements should be included in a comprehensive emergency response plan?
• C.O.C License Class B is defined as?
• Who is responsible for approving equipment, materials, an installation, or procedure?
• Which combination best reflects the weather factors that influence pyrotechnic safety decisions?
• What term refers to black match encased in a loose fitting sheath for propagating flame rapidly, used in aerial shells and lance ground display pieces?
• During an electrically fired show, the shooter should be in direct contact with whom at all times?
• General mortar length should be?
• Which term is a long tube containing slow burning pyrotechnic composition used to ignite fireworks?
• What is the required time window between lighting the fuse and firing the shell to allow the shooter to retreat safely?
• Which NFPA standard governs these guidelines?
• Ground Salutes should be made of paper or the equivalent, and must not be constructed of which materials?
• Which NFPA standards are most commonly referenced for professional pyrotechnic displays in New York?
• The area immediately surrounding the fireworks mortars used for an outdoor display is called:
• When planning firing locations, which factor should be considered along with others to minimize risk and comply with regulations?
• Which action is a standard part of the incident investigation process after a safety event?
• What is the term for the maximum current that can be applied to an electrical match for 5 seconds at room temperature without igniting?
• Battery is defined as:
• Why is it important to protect firing instructions and device configurations?
• What is the purpose of the NYS Certificate of Competency Class B Pyrotechnician license?
• What is the minimum age to be an Authorized Assistant?
• How many shells can a shooter safely manually fire?
• How many shows must an applicant actively participate in as an operator or assistant?
• C.O.C License Class C is defined as?
• In planning, which crowd-safety measures should be included?
• The site for an outdoor land or water display shall have at least how many feet radius times the internal mortar diameter?
• Fireworks are defined as which of the following?
• What is the typical sequence of actions in an incident investigation after a safety event?
• How many egress paths should be available at all times on a floating vessel?
• Buried mortars should be buried to what proportion of their length?
• Which item is explicitly logged as part of post-event documentation?
• How should unserviceable devices or components be handled?
• Which practices are risk controls?
• What is the policy regarding alcohol or drug use for pyrotechnic personnel?
• What considerations apply to indoor shows versus outdoor shows?
• Distance between mortars and safety shelter on a floating vessel is determined by which of the following?
• What considerations are essential when selecting extinguishing equipment for a pyrotechnic display?
• Which statement correctly describes the relationship between device labeling and storage verification?
• The spotter should have direct communication at all times with ___?
• What should be done with a wet or damaged shell?
• Display Site is defined as:
• Which statement best describes access control for remote firing systems?
• The proper disposal of an aerial shell shall be provided by ___.
• What is the minimum site radius for a 3 inch mortar?
• What is the primary purpose of a risk assessment for a pyrotechnic display?
• Where must a certified pyrotechnic license holder keep their license?
• What does the acronym PIC stand for?
• In the example, 100 shells x 6 inches yields what minimum display site distance?
• What is the primary purpose of performing a device test or dry run before a pyrotechnic show?
• For safe fireworks handling, the distance from public access must be at least
• Which component is a thin cardboard tube packed with color producing pyrotechnic composition used to construct ground display pieces?
• What is NFPA 1126 primarily concerned with?
• What is the minimum safe distance for unauthorized persons and the public from fireworks?
• What is the purpose of maintaining a chain-of-custody for pyrotechnic devices and components?
• An illuminating torch is defined as a cylindrical tube containing not more than how many grams of pyrotechnic composition that produces a colored flame?
• In this context, 'Acceptable' means what relative to the Commissioner of Labor of NY?
• Which item is described as a highway distress flare, or something used to ignite fireworks?
• What permits or authorizations are commonly required before a public pyrotechnic display?
• What is the primary purpose of maintaining a safe perimeter around storage areas for pyrotechnic devices?
• Which statement best describes NFPA 1126?
• The trajectory shall not come within how many feet of any overhead object?
• Which item is a highway distress flare, or something used to ignite fireworks?
• What is the safe distance a loader should stay from a shooter during a manually fired show?
• A cylindrical tube described as a fountain may contain not more than how many grams of pyrotechnic composition?
• A fireworks show on a floating vessel may be manually fired if the following conditions are true?
• Single break Aerial Salute shells shall not exceed what diameter?
• Which statement about manual firing on a floating vessel is not a condition?
• Which statement best describes a Pyrotechnic Device?
• Which statement best describes storage and inventory control per NFPA guidelines?
• During the firing of a display, cakes shall be located how many feet from the ready box?
• What is a key reason for securing the scene before collecting evidence in an incident investigation?
• The mandated clearance between buried mortars and the wall of troughs or drums is
• Which statement best describes the role of a site plan in safety responsibilities?
• Which item is NOT typically part of device labeling and inventory control?
• Which option correctly states the required clearance between buried mortars and the wall of troughs or drums?
• Chain fused mortar racks shall be limited to which maximum shell size?
• What is the minimum separation between electrical and manual fire methods?
• Which considerations typically influence the selection of a firing location (perimeter, audience, wind)?
• What is the PIC's role in ensuring crew competence and supervision?
• What minimum distance must be maintained between fireworks preparation areas and public access?
• What is a magazine in pyrotechnics, and what is its purpose?
• Cone Fountain is defined as a cardboard or heavy paper cone containing not more than how many grams of pyrotechnic composition?
• Which device is defined as a cylindrical tube containing not more than 100 g of pyrotechnic composition that produces a colored flame upon ignition?
• Pyrotechnics are defined as?
• If a wet or damaged shell is found, what action should be taken?
• Firing troughs shall be reinforced or braced at intervals of no more than how many feet?
• During operations, what is a key responsibility of the person in charge to maintain safety?
• Ground display pieces shall have a minimum display radius of how many feet?
• Aerial shells Larger than 6 inches may be fired if the following conditions are met?
• What term means debris produced or expelled by the functioning of a pyrotechnic device capable of causing injury or damage?
• C.O.C License Class A is defined as?
• Provide an example of a post-show debrief checklist item.
• What is the term for the area over which aerial shells are fired and where debris may fall?
• NFPA 1126 codes pertain to which category?
• No person shall act as Certified Pyrotechnician unless?
• Authority Having Jurisdiction (AHJ) is defined as:
• What pre-event document identifies hazards and defines the controls planned to mitigate them?
• Which term describes a rapidly fired sequence of aerial fireworks?
• Which fuse is commonly referred to as Visco fuse, consisting of a gunpowder core encased in a waterproof textile wrap?
• What is the purpose of a fire watch during a display?
• What is the maximum number of shells a shooter can manually fire per minute?
• Class 1.4G devices are defined as which of the following?
• The Operator is primarily responsible for which areas?
• A cone fountain consists of a cardboard or heavy paper cone containing not more than how many grams of pyrotechnic composition?
• Which practices are risk controls to minimize misfires or premature initiation?
• Ground salutes shall not exceed which dimension?
• Which statements are prerequisites for applying for a Certificate of Competency?
• Which trainings are required for an Authorized Assistant?
• Why is there a no alcohol policy during pyrotechnic operations?
• A Ready Box during a performance must be located at least how many feet upwind?
• Which factor is critical to display planning due to safety concerns?
• How many loaders per shooter?
• A fuse made from a 'tube' of gunpowder surrounded by a waterproofed varnished jute rope, with a timed burn time?
• Chain fused mortar racks shall be limited to no larger than which shell size?
• Which element is included in an emergency response plan?
• What is the primary function of a firing system in a display?
• NFPA 1123 codes pertain to what?
• Which term refers to a collection of firework devices fused together and fired within a short period of time?
• What is the Operator's primary responsibility?
• Assistant is defined as:
• Class 1.1G devices are defined as which of the following?
• What is the purpose of a site plan or fire-safety plan?